Atlas Copco Dynapac F3030C User Manual

D11 11
button again
Avoid dazzling other road
users!
14
Working lights, rear
ON / OFF
Switch ON the rear working
lights
Switch OFF by pressing the
button again
Avoid dazzling other road
users!
15 Screed vibration switch
Pushbutton function:
-Activate screed vibration
(“AUTO” or “MANUAL”)
For triggering screed vibration,
screed vibration switch must be
switched to “AUTO” or
“MANUAL”.
Screed vibration speed under
“MANUAL” mode is equal to the
highest speed under “AUTO”
mode.
To work under “AUTO” mode,
drive lever must be put into
forward postion.
16 Emergency stop button
In the case of an emergency
(danger to persons, possible
collision, etc.), press in the
button!
- Pressing the emergency stop
button switches the engine, the
drives and the steering system
off.
Making way, lifting the screed
or other actions are then no
longer possible! Danger of

Atlas Copco Dynapac F3030C Specifications

General

Brand	Atlas Copco
Model	Dynapac F3030C
Category	Construction Equipment
Language	English