Atlas Copco Dynapac F3030C - Page 97

D11 35
be switched to “AUTO” or
“MANUAL”.
Auger speed under “MANUAL”
mode equals to the highest
speed under “AUTO” mode.
To work under “AUTO” mode,
drive lever must be put into
forward postion.
6
Right conveyor pushbutton,
manual
When material is unsufficient,
press this button for material
conveying, release the button
when material is sufficient.
7
Right auger speed preseletor,
manual
When auger is under
“MANUAL” mode, use this
button to control auger speed;
left side speed is the lowest,
right side speed is the highest.
8 Horn
Press in case of emergencies
and indicate when vechile starts
to move!