Atom IncuArch - [14] Technical Data; Electrical ratings; Equipment classification; Dimensions;Weight (Approx.)

APPENDIX
Technical Data
91
[14] Technical Data
Electrical
ratings
AC power source Rating: Voltage - AC100-240V; power consumption -
220VA; frequency - 50/60Hz
Operating voltage range: AC100-240V±10%
External DC power source DC12V, 13A
DC24V, 6.5A
Operating voltage range DC12V: DC12.4V-DC15.1V
DC24V: DC24.8V-DC30.3V
Built-in batteries Battery 1 DC24V/10Ah (lithium-ion battery)
Battery 2 DC24V/10Ah (lithium-ion battery) (option)
Hours of continuous operation At least 3 hours (When operated by the battery after the
incubator temperature has stabilized while a new bat-
tery is fully charged, the incubator temperature is set to
36°C, and the ambient temperature is 15°C.)
Equipment
classification
Type of protection: Class I, Internally powered
Degree of protection: Type BF - Applied part
Liquid ingress: IPX0
Not suitable for use in the presence of a flammable anesthetic mixture with air or with
oxygen or nitrous oxide and flammable anesthetic gas mixture.
Mode of operation: Continuously operating device
Dimensions/
Weight
(Approx.)
Main body 97.5(W)×47.5(D)×43.5(H)cm/25kg
Mattress 62(W)×33(D)×3(H)cm
HL Stand for IncuArch 100(W)×47.5(D)×51.0-83.0(H)cm/27kg
Cabinet Stand for IncuArch 92(W)×43(D)×83(H)cm/32kg
Multi-purpose Pole for IncuArch 39cm/1kg
Multi-purpose Pole for HL Stand 75cm/1kg
Crank Type Multi-purpose Pole for Cabinet Stand 85cm/2kg
Cylinder holder for 165L cylinder (Pole mounting type) 15(W)× 20(D)×19(H)cm/0.5kg
Applied part Mattress
Skin temperature probe
Pulse oximeter sensor (option)
Maximum load
capacity
Cabinet stand (option): Approx. 20kg
Multi-purpose pole (option): Approx. 4kg
Operating
conditions
Ambient temperature: 10-30°C
Relative humidity: 30-75%
Atmospheric pressure: 70-106kPa
Air velocity: 0.3-1.0m/s
Storage
conditions/
Transport
conditions
Ambient temperature: 0-50°C
Relative humidity: 30-75%
Atmospheric pressure: 70-106kPa