Cleaning and Disinfection
72
* Recommended disinfectant solutions include:
z
Benzalkonium chloride aqueous solution (e.g. Osvan)
z
Benzethonium chloride aqueous solution (e.g. Hyamine)
z
Chlorhexidine aqueous solution (e.g. Hibitane)
10-1.
Hood Assembly
(1) Open the admittance panels and remove all of the
tube introduction slit packing.
z
When putting the hood assembly back into place,
ensure that it is seated all the way in the packing
on the hood.
Tube introduction slit packing
(2) Remove all packings from the snap-open access
ports.
Snap-open access
port packing
(3) Remove the oxygen sensor attaching port packing.
Oxygen sensor attaching
port packing
(4) Loosen the Fixing screws and remove the admit-
tance panel and inner panel.
Fixing screw
Inner
panel
To Next Page
Loading...
