AuCom EMX4i - 3.15 Specifications

SYSTEM DESIGN
22 EMX4i User Manual 710-14888-00C
3.15 Specifications
Supply
Mains voltage (L1, L2, L3)
EMX4i-xxxxB-V5 ....................................................... 200~525 VAC (± 10%)
EMX4i-xxxxB-V7 ....................................................... 380~690 VAC (± 10%)
Control voltage (A1, A2, A3)
EMX4i-xxxxB-xx-C1 (A1, A2) ........... 110~120 VAC (+10%/-15%), 600 mA
EMX4i-xxxxB-xx-C1 (A2, A3) ........... 220~240 VAC (+10%/-15%), 600 mA
EMX4i-xxxxB-xx-C2 (A1, A2) ........................... 24 VAC/VDC (± 20%), 2.8 A
Mains frequency .............................................................. 50 Hz~60 Hz (±5 Hz)
Rated insulation voltage to earth ....................................................... 600 VAC
Rated impulse withstand voltage ............................................................. 6 kV
Form designation ..................................................................................................
................. Bypassed or continuous, semiconductor motor starter form 1
Short circuit capability
Coordination with semiconductor fuses .............................................. Type 2
Coordination with HRC fuses ................................................................ Type 1
Electromagnetic capability (compliant with EU Directive 2014/35/EU)
EMC Immunity .......................................................................... IEC 60947-4-2
EMC Emissions ........................................................... IEC 60947-4-2 Class B
Inputs
Input rating ......................................................... Active 24 VDC, 8 mA approx
Motor thermistor (B4, B5) .................................. Trip >3.6 kΩ, reset <1.6 kΩ
Outputs
Relay outputs .............. 10 A @ 250 VAC resistive, 5A @ 250 VAC AC15 pf 0.3
Main contactor (33, 34) ...................................................... Normally Open
Relay output A (41, 42, 44) ...................................................... Changeover
Relay output B (53, 54) ....................................................... Normally Open
Analog output (21, 22)
Maximum load ................................................... 600 Ω (12 VDC @ 20 mA)
Accuracy .............................................................................................. ± 5%