AuCom EMX4i - 9.23 35 Thermal Protection

PROGRAMMABLE PARAMETERS
106 EMX4i User Manual 710-14888-00C
9.24 36 Pump Trip Action
36A – Pressure Sensor
Options:
Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter
Log Only
Description:
Selects the soft starter's response if it detects a fault with the
pressure sensor.
36B – Flow Sensor
Options:
Soft Trip and Log (default)
Trip and Reset
Soft Trip and Reset
Warn and Log
Trip Starter Log Only
Description:
Selects the soft starter's response if it detects a fault with the
flow sensor.
36C – Depth Sensor
Options:
Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter Log Only
Description:
Selects the soft starter's response if it detects a fault with the
depth sensor.
36D – High Pressure
Options:
Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter
Log Only
Description:
Selects the soft starter's response if the pressure exceeds the
high pressure trip level (parameter 32A) or the high pressure
switch sensor closes.
36E – Low Pressure
Options:
Soft Trip and Log (default) Trip and Reset
Soft Trip and Reset Warn and Log
Trip Starter Log Only
Description:
Selects the soft starter's response if the pressure falls below
the low pressure trip level (parameter 32D) or the low pressure
switch sensor closes.