AuCom EMX4i - Page 69

PROGRAMMABLE PARAMETERS
68 EMX4i User Manual 710-14888-00C
Parameter Group
Default Setting
30J
Pulses per Minute at Max Flow
0
30K Units per Pulse 0
30L Depth Sensor Type None
30M Depth Units metres
30N Depth at 4 mA 0
30O Depth at 20 mA 0
31
Flow Protection
31A High Flow Trip Level 10
31B Low Flow Trip Level 5
31C Flow Start Delay 00:00:50 (mm:ss:ms)
31D Flow Response Delay 00:00:50 (mm:ss:ms)
32
Pressure Protection
32A
High Pressure Trip Level
10
32B High Pressure Start Delay 00:00:50 (mm:ss:ms)
32C High Pressure Response Delay 00:00:50 (mm:ss:ms)
32D Low Pressure Trip Level 5
32E Low Pressure Start Delay 00:00:50 (mm:ss:ms)
32F
Low Pressure Response Delay
00:00:50 (mm:ss:ms)
33
Pressure Control
33A Pressure Control Mode Off
33B Start Pressure Level 5
33C Start Response Delay 00:00:50 (mm:ss:ms)
33D Stop Pressure Level 10
33E
Stop Response Delay
00:00:50 (mm:ss:ms)
34
Depth Protection
34A Depth Trip Level 5
34B Depth Reset Level 10
34C Depth Start Delay 00:00:50 (mm:ss:ms)
34D Depth Response Delay 00:00:50 (mm:ss:ms)
35
Thermal Protection
35A Temperature Sensor Type None
35B Temperature Trip Level 40