– Fit brake pads.
– Ensure that the brake pads are located correctly in the pad
retainers -arrows-.
Note
The next work step only applies to vehicles on which the brake
carrier needed to be removed.
– Use interchangeable head - T40065- or interchangeable head
- T40066- to install the lower bolt connection.
– Secure brake caliper housing with new self-locking bolts.
Note
The repair kit includes four self-locking hexagon bolts which must
be installed in all cases.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
6. Rear brakes, electronic parking brake and handbrake (EPB) 111
To Next Page
Loading...
