Audio Precision ATS-1 Access User Manual

with a set of data, so that field test results can be saved for later
analysis or printing.
All measurements, settings, and graphs are displayed on a sharp, clear,
backlighted liquid crystal display.
The ATS-1 may be operated manually from the front panel, or may be
programmed via the IEEE-488 computer port. This User’s Manual
describes manual operation. See the ATS-1 GPIB Programmer’s
Reference Manual for complete documentation on controlling the
ATS-1 via IEEE-488.
The ATS-1 Access can be purchased with or without the IMD option,
which allows generation and analysis of intermodulation distortion.
The IMD measurement function conforms to the SMPTE and DIN
testing standards, and is described on page 4-27.
The ATS-1 Access may also be purchased with the EGZ option, which
replaces the 150 Ω generator output impedance selection with 200 Ω,
which is more common in European broadcast.
Other options include optional filters for specific band-limiting or
weighting applications, a choice of front panel connectors (described
on Page 1-8), and a rackmount kit.
Any installed options are listed on the Options Label on the rear panel.
1 Description
Description Introducing the ATS-1 Access
ATS-1 Access User's Manual 1-5

Audio Precision ATS-1 Access Specifications

General

Brand	Audio Precision
Model	ATS-1 Access
Category	Test Equipment
Language	English