IP Networking Configuration
Configuration Guide 108 Document #: LTRT-31657
18.2 Traceroute v6
The ping informs you if the destination is reachable or not. The traceroute command can
be used to discover the path that packets travel to the remote destination.
Command Structure:
Traceroute ipv6 <IP Address> [vrf vrf / source address]
Typical Output:
MSBR# trace ipv6 3000::1
1 2000::1 (2000::2) 1.169 ms * 7.346 ms
2 2020::1 (2020::2) 1.169 ms * 7.346 ms
.
.
8 3000::1 (3000::1) 1.169 ms * 7.346 ms
Traceroute: Destination reached
MSBR#
To Next Page
Loading...
