IP Networking Configuration
Configuration Guide 134 Document #: LTRT-31657
ip pim spt-threshold infinity
OR
ip pim spt-threshold packets <number of
packets> interval <sec>
OR
ip pim spt-threshold rate <kpps>
interval <sec>
Sets threshold for moving to shortest
path tree between the multicast server
and the client.
ď‚§ infinity - Never switch to shortest
path
 packets – Move to shortest path tree
when number of packets threshold
was crossed during the specified
interval
ď‚§ rate - Move to shortest path tree when
packet rate threshold was crossed
during the specified interval
Group Prefixes supported by RP
Candidate. Up to 255 groups are
supported.
21.2.2 Status Commands
Command Description
Displays Multicast route information.
show data ip mroute interfaces
Displays Multicast route interface information.
show data ip mroute detail
Displays Detailed multicast route information.
show data ip pim bsr-router
Displays PIM BSR information.
Displays PIM group information.
show data ip pim interfaces
Displays PIM interface and neighbor information.
Displays PIM RP information.
MSBR# show data ip mroute
(Source, Multicast Group) Input Interface Output
Interface
(192.168.10.3, 232.0.0.42) VLAN 1 Fiber 0/1
Show data ip mroute interfaces
500L - MSBR2*# show data ip mroute interfaces
Interface BytesIn PktsIn BytesOut PktsOut Flags Local
Remote
0 VLAN 1 26082 162 6956 7 NONE
192.168.2.1 0.0.0.0
2 Giga 0/0 0 0 0 NONE
172.17.116.22 0.0.0.0
3 Fiber 0/1 6956 7 0 0 NONE
200.200.200.2 0.0.0.0
4 PIM 0 0 0 0 REGISTER
192.168.2.1 0.0.0.0
500L - MSBR2*#