Version 6.8 11 Mediant MSBR
Configuration Guide 1. Introduction
1 Introduction
As an all-in-one product family, the MSBR provides a variety of data services. As a rule,
data services of any-size organization are based on IP networking as a standard, as IPv4
(and in the future, IPv6) are the official and standard suits of data network protocols.
This document deals with the IP data functionality of the MSBR and addresses the purpose
of listing and explaining the kinds and nature of the IP protocols supported by the MSBR,
explaining their most common uses and functionality, how to configure and implement
them in an existing network, and demonstrating the most common and real-life-like
scenarios and best practices in which those protocols can and should be used. In addition,
a list of available commands and options for each protocol is described.
The examples in this document include topology, configuration methods and sample output
and verifying commands to better understand the way they operate.
All mentioned protocols and technologies can be used in a more complex and advanced
configuration than some of those demonstrated in this document; however, the main goal is
to demonstrate common and well-tested implementations.
To Next Page
Loading...
