AudioCodes Mediant MSBR Series Configuration Guide

IP Networking Configuration
Configuration Guide 118 Document #: LTRT-31657
20.3.3 Useful Output and show Commands
MSBR2# show data ipv6 ospf neighbor
Neighbor ID Pri DeadTime State/IfState Duration I/F[State]
1.1.1.1 1 00:00:40 Full/DR 00:15:25 VLAN 1[BDR]
MSBR2# show data ipv6 ospf6
OSPFv3 Routing Process (0) with Router-ID 1.1.1.2
Running 00:16:14
Number of AS scoped LSAs is 7
Number of areas in this router is 1
Area 0.0.0.5
Number of Area scoped LSAs is 5
Interface attached to this area: VLAN 1
MSBR2# show data ipv6 route ospf6
Codes: K - kernel route, C - connected, S - static,
R - RIPng, O - OSPFv6, B - BGP
O 2000::33:0/124 [110/1] via fe80::290:8fff:fe2e:eda8, VLAN 1,
00:12:41
O 2002::/64 [110/2] via fe80::290:8fff:fe2e:eda8, VLAN 1, 00:12:41
O 2011:3333::/64 [110/1] is directly connected, VLAN 1, 00:22:22
O 2014:9999::/64 [110/1] via fe80::290:8fff:fe2e:eda8, VLAN 1,
00:12:41
O fc11::/124 [110/1] via fe80::290:8fff:fe2e:eda8, VLAN 1, 00:12:41
O fc12::/124 [110/1] via fe80::290:8fff:fe2e:eda8, VLAN 1, 00:12:41

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English