Version 6.8 129 Mediant MSBR
Configuration Guide 20. IPv6 Routing
MSBR(conf-if-VLAN 1)# ipv6 enable
MSBR(conf-if-VLAN 1)# ipv6 dhcp-server enable
MSBR(conf-if-VLAN 1)# ipv6 nd pd GigabitEthernet 0/0
2001:100:100:ff01::/64
20.5.5.2 Output
ISP CISCO 7200 output is as follows.
ISP# show ipv6 dhcp pool
DHCPv6 pool: dhcpv6
Prefix pool: dhcpv6-pool1
preferred lifetime 600, valid lifetime 1800
Active clients: 1
ISP#
ISP# show ipv6 dhcp binding
Client: FE80::290:8FFF:FE4A:2344 (FastEthernet0/0)
DUID: 0001000112EF4ABE00908F4A2343
IA PD: IA ID 0x00000000, T1 300, T2 480
Prefix: 2001:100:0:FF00::/56
preferred lifetime 600, valid lifetime 1800
expires at May 04 2014 11:52 AM (1685 seconds)
ISP#
The following host's output shows that the host received an IPv6 prefix and generated an
IP address for itself:
>ipconfig
Ethernet adapter LAN:
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 180.1.100.20
Subnet Mask . . . . . . . . . . . : 255.255.255.0
IP Address. . . . . . . . . . . . :
2001:100:100:ff01:9077:cd4e:f720:f9a5
Link-local IPv6 Address . . . . . : fe80::290:8fff:fe4a:2343%6
IPv4 Address. . . . . . . . . . . : 192.168.99.1
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 180.1.1.1
fe80::c801:2aff:fe90:6%29
To Next Page
Loading...
Need help?
General
