AudioCodes Mediant MSBR Series Configuration Guide

Version 6.8 41 Mediant MSBR
Configuration Guide 7. Track
7 Track
This command tracks a destination IP address from a given source interface. The tracking
is done by sending ICMP probes and monitors the replies. If the destination is reachable,
the Track Status is set to ‘up’. When a configurable number of replies are not received, the
Track Status is set to ‘down’.
7.1 Configuring Track
Command Description
MSBR# configure data
Enters the data configuration menu.
(config-data)# track
id
icmpecho
destIP interface [source-ip-
interface interface] [interval
val
] [retries
val
]
Configures a Track to monitor reachability to
destIP from the interface.
7.2 Output
MSBR1# show data track brief
Track Type State Max round trip time (m.s)
1 ICMP reachability Up 37
Get the time of up to the last 10 Track states:
MSBR1# show data track 1 history
Track history: New state Date and Time [MM-DD-YYYY@hh:mm:ss]
Up 08-28-2015@18:17:40
Down 08-28-2015@18:25:30
Up 08-28-2015@18:26:20

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English