AudioCodes Mediant MSBR Series Configuration Guide

Version 6.8 67 Mediant MSBR
Configuration Guide 11. Dynamic IP Routing
11.3.3.1 Configuration
*******************************************
Basic Configuration omitted
*******************************************
MSBR(conf-router)# router bgp 65000
MSBR(conf-router)# bgp router-id 1.1.1.1
MSBR(conf-router)# bgp log-neighbor-changes
MSBR(conf-router)# network 100.0.12.0/24
MSBR(conf-router)# network 200.0.5.0/24
MSBR(conf-router)# network 192.168.0.0/24
MSBR(conf-router)# neighbor 100.0.12.20 remote-as 55101
MSBR(conf-router)# neighbor 100.0.12.20 Activate
MSBR(conf-router)# neighbor 200.0.5.20 remote-as 55202
MSBR(conf-router)# neighbor 200.0.5.10 Activate
The configuration includes two important parts:

The basic configuration defines the networks to be advertised and routed, and the
neighbors to which to establish adjacency.

The second part of the configuration deals with prioritizing the routes received from
neighbors. Given the fact that a default route is received via the BGP protocols from
both neighbors, you need to give one of them a higher priority (better metric). This is
performed using a route-map that tweaks the “Weight” BGP attribute of incoming
route-updates, and the one with the higher Weight value gets inserted into the routing
table.

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English