AudioCodes Mediant MSBR Series

Version 6.8 147 Mediant MSBR
Configuration Guide 21. IP Multicast – PIM Sparse Mode
wan-http-allow on
set https-cipher-string "RC4:EXP"
activate
exit
hostname M500_Reciver
configuration-version 0
exit
## Data Configuration
configure data
radio shutdown
ip multicast-routing
mode pim
exit
interface GigabitEthernet 0/0
ip address dhcp
ip dhcp-client default-route
mtu auto
desc "WAN Copper"
no ipv6 enable
speed auto
duplex auto
no service dhcp
ip dns server auto
napt
firewall enable
no shutdown
exit
interface Fiber 0/1
ip address 200.0.0.1 255.255.255.252
ip pim sparse-mode
mtu auto
desc "WAN Fiber"
no ipv6 enable
no service dhcp
ip dns server static
no napt
no firewall enable
no shutdown
exit
interface dsl 0/2
#DSL configuration is automatic
#Termination cpe
mode adsl
shutdown
exit
interface EFM 0/2
#This interface is DISABLED due to physical layer configuration
no ip address