AudioCodes Mediant MSBR Series Configuration Guide

Configuration Guide A. Mediant 500 Transmitter Examples
Version 6.8 169 Mediant MSBR
exit
interface BVI 1
ip address 192.168.0.1 255.255.255.0
ip pim sparse-mode
mtu auto
desc "LAN Bridge"
ip dhcp-server network 192.168.0.3 192.168.0.8 255.255.255.0
ip dhcp-server dns-server 0.0.0.0
ip dhcp-server netbios-name-server 0.0.0.0
ip dhcp-server lease 0 1 0
ip dhcp-server provide-host-name
ip dhcp-server ntp-server 0.0.0.0
ip dhcp-server tftp-server 0.0.0.0
ip dhcp-server override-router-address 0.0.0.0
ip dhcp-server next-server 0.0.0.0
service dhcp
ip dns server static
no napt
no firewall enable
no shutdown
exit
interface dot11radio 1
#This interface is DISABLED due to physical layer configuration
no ip address
bridge-group 1
mtu auto
desc "LAN Wireless 802.11n Access Point"
no ipv6 enable
no service dhcp
ssid MSBR
broadcast
security mode NONE
no security mac mode
mode ngb
channel width 40/20
channel auto
wmm
exit
router ospf
redistribute connected
network 200.0.0.0/30 area 1.1.1.1
exit
ip nat translation udp-timeout 120
ip nat translation tcp-timeout 86400
ip nat translation icmp-timeout 6
# Note: The following WAN ports are in use by system services,
# conflicting rules should not be created:
# Ports 80 - 80 --> HTTP
# Ports 23 - 23 --> Telnet CLI
# Ports 22 - 22 --> SSH CLI
# Ports 82 - 82 --> TR069

AudioCodes Mediant MSBR Series Specifications

General

Brand	AudioCodes
Model	Mediant MSBR Series
Category	Network Router
Language	English