EasyManua.ls Logo

AudioCodes Mediant MSBR Series

AudioCodes Mediant MSBR Series
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 6.8 23 Mediant MSBR
Configuration Guide 4. VRRP
vrrp 1 ip 10.100.10.1
mtu auto
desc "LAN switch VLAN 1"
no ipv6 enable
no napt
no firewall enable
no link-state monitor
no shutdown
exit
ip nat translation udp-timeout 120
ip nat translation tcp-timeout 86400
ip nat translation icmp-timeout 6
# Note: The following WAN ports are in use by system
services,
# conflicting rules should not be created:
# Ports 80 - 80 --> HTTP
# Ports 23 - 23 --> Telnet CLI
# Ports 22 - 22 --> SSH CLI
# Ports 82 - 82 --> TR069
ip domain name home
ip domain localhost msbr
pm sample-interval minute 5
pm sample-interval seconds 15
exit
Slave:
M500 *# show run
# Running Configuration M500
## VoIP Configuration
configure voip
interface network-dev 0
name "vlan 1"
activate
exit
interface network-if 0
ip-address 192.168.10.2
prefix-length 24
gateway 192.168.10.1
name "Voice"
primary-dns 192.168.10.1
underlying-dev "vlan 1"
activate
exit
media udp-port-configuration
udp-port-spacing 10
activate
exit

Table of Contents

Other manuals for AudioCodes Mediant MSBR Series

Related product manuals