AudioCodes Mediant MSBR Series - Page 63

Version 6.8 63 Mediant MSBR
Configuration Guide 11. Dynamic IP Routing
Command Description
next-hop-self
routing.
(conf-router-af)# neighbor
address
peer-group
name
Configures as member of a peer-group.
(conf-router-af)# neighbor
address
prefix-list name <in/out>
Configures filtering of updates to/from the
specified neighbor.
(conf-router-af)# neighbor
address
remove-private-as
Removes the private AS number from outbound
updates.
(conf-router-af)# neighbor
address
route-map name
<export/import/in/out>
Configures to apply a route-map to a neighbor.
(conf-router-af)# neighbor
address
route-reflector-client
Configures neighbor as a route reflector client.
(conf-router-af)# neighbor
address
route-server-client
Configures neighbor as route server client.
(conf-router-af)# neighbor
address
send-community
[both/extended/standard]
Configures to send community attributes to the
specified neighbor.
(conf-router-af)# neighbor
address
soft-reconfiguration inbound
Configures per-neighbor soft reconfiguration.
(conf-router-af)# neighbor
address
unsuppresse-map
Configures a route-map to selectively
un-suppress suppressed routes.
(conf-router-af)# network
prefix/[length] [route-map name]
Configures a network to be announced via BGP
protocol.