MediaPack Analog Gateways 13 MP-1288
Hardware Installation Manual 2. Unpacking the Device
2 Unpacking the Device
Follow the procedure below for unpacking the carton in which the device is shipped.
To unpack the device:
1. Open the carton and remove packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
• 2 x front-mounting brackets for 19-inch rack mounting
• 1 x RJ-45 to DB-9 serial cable adapter for serial communication
• 1 x AC power cord (or two if ordered with dual Power Supply modules)
• 1 x grounding lug
5. Check, retain and process any documents.
If there are any damaged or missing items, notify your AudioCodes sales representative.
To Next Page
Loading...
