User's Manual 6. Configuration Using the Web Interface
Version 6.6 83 MediaPack Series
6.5.1.5.2 Telnet/SSH Settings
To enable Telnet:
1. Open the Telnet/SSH Settings page (Configuration tab > System menu >
Management > Telnet/SSH Settings).
Figure 46: Telnet/SSH Settings
2. To configure this page, refer to the Secure Telnet sub-section in the Product
Reference Manual.
3. After configuring/modifying the parameter fields, click the Submit button. The changes
are entered into the system and the page is refreshed.
6.5.1.5.2.1 Web & Telnet Access List
To configure the Web & Telnet Access List:
1. Open the Web & Telnet Access List page (Configuration tab > System menu >
Management > Web & Telnet Access List).
Figure 47: Web & Telnet Access List
2. To add a new authorized IP address, in the Add a new Authorized IP Address field at
the bottom portion of the page, enter the required IP address and click Add New Entry.
To Next Page
Loading...
