User's Manual 1166 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description
[SBCFaxDetectionTimeout]
of a voice session. The interval starts from the establishment
of the voice call.
The valid value is 1 to any integer. The default is 10.
The feature applies to faxes that are sent immediately after the
voice channel is established (i.e., after 200 OK).
You
can configure the handling of fax negotiation by the device
for specific calls, using IP Profiles configured in the IP Profiles
table (see the
IpProfile_SBCRemoteRenegotiateOnFaxDetection parameter
in Configuring IP Profiles on page
393).
Admission Control Table
Admission Control
configure voip > sbc sbc-
admission-control
[SBCAdmissionControl]
Defines Call Admission Control (CAC) rules.
The format of the ini file table parameter is as follows:
[SBCAdmissionControl]
FORMAT SBCAdmissionControl_Index =
SBCAdmissionControl_AdmissionControlName,
SBCAdmissionControl_LimitType,
SBCAdmissionControl_IPGroupName,
SBCAdmissionControl_SRDName,
SBCAdmissionControl_SIPInterfaceName,
SBCAdmissionControl_RequestType,
SBCAdmissionControl_RequestDirection,
SBCAdmissionControl_Limit,
SBCAdmissionControl_LimitPerUser,
SBCAdmissionControl_Rate,
SBCAdmissionControl_MaxBurst,
SBCAdmissionControl_Reservation;
[\SBCAdmissionControl]
For a description of the table, see ''Configuring Admission
Control'' on page 643.
Allowed Audio Coders Table
Allowed Audio Coders
configure voip > coders-and-
profiles allowed-audio-coders
<group index > coder index>
[AllowedAudioCoders]
Defines audio coders for the Allowed Audio Coders Group.
The format of the ini file table parameter is as follows:
[ AllowedAudioCoders ]
FORMAT AllowedAudioCoders_Index =
AllowedAudioCoders_AllowedAudioCodersGroupName,
AllowedAudioCoders_AllowedAudioCodersIndex,
AllowedAudioCoders_CoderID,
AllowedAudioCoders_UserDefineCoder;
[ \AllowedAudioCoders ]
For a description of the table, see ''Configuring Allowed Audio
Coder Groups'' on page 389.
Allowed Audio Coders Groups Table
Allowed Audio Coders Groups
configure voip > coders-and-
profiles allowed-audio-coders-
groups
[AllowedAudioCodersGroups]
Defines the index and name of the Allowed Audio Coders
Group.
The format of the ini file table parameter is as follows:
[ AllowedAudioCodersGroups ]
FORMAT AllowedAudioCodersGroups_Index =