AudioCodes MSBG Series User Manual

Version 7.2 1175 Mediant 1000B Gateway & E-SBC
User's Manual 62. Configuration Parameters Reference
Parameter Description
associated with the IP Profile.
AMD Sensitivity File
[AMDSensitivityFileName]
Defines the name of the AMD Sensitivity file that contains the
AMD Parameter Suites.
Note:
 This file must be in binary format (.dat). You can use the
DConvert utility to convert the original file format from XML
to .dat.
 You can load this file using the Web interface (see ''Loading
Auxiliary Files'' on page 737).
[AMDSensitivityFileUrl] Defines the URL path to the AMD Sensitivity file for
downloading from a remote server.
[AMDMinimumVoiceLength] Defines the AMD minimum voice activity detection duration (in
5-ms units). Voice activity duration below this threshold is
ignored and considered as non-voice.
The valid value range is 10 to 100. The default is 42 (i.e., 210
ms).
[AMDMaxGreetingTime] Global parameter that defines the maximum duration that the
device can take to detect a greeting message. You can also
configure this functionality per specific calls, using IP Profiles
(IpProfile_AMDMaxGreetingTime). For a detailed description of
the parameter and for configuring this functionality in the IP
Profiles table, see ''Configuring IP Profiles'' on page 393.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
[AMDMaxPostGreetingSilenceTime] Global parameter that defines the maximum duration of silence
from after the greeting time is over (defined by
AMDMaxGreetingTime) until the device's AMD decision. You
can also configure this functionality per specific calls, using IP
Profiles (IpProfile_AMDMaxPostSilenceGreetingTime). For a
detailed description of the parameter and for configuring this
functionality in the IP Profiles table, see ''Configuring IP
Profiles'' on page 393.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
[AMDTimeout] Defines the timeout (in msec) between receiving Connect
messages from the Tel side and sending AMD results.
The valid range is 1 to 30,000. The default is 2,000 (i.e., 2
seconds).
AMD Beep Detection Mode
configure voip > sip-definition
settings > amd-beep-detection
[AMDBeepDetectionMode]
Determines the AMD beep detection mode. This mode detects
the beeps played at the end of an answering machine
message, by using the X-Detect header extension. The device
sends a SIP INFO message containing the field values
Type=AMD and SubType=Beep. This feature allows users of
certain third-party, Application server to leave a voice message
after an answering machine plays the “beep”.
 [0] Disabled (default)
 [1] Start After AMD

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English