AudioCodes MSBG Series User Manual

User's Manual 1174 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
Parameter Description

[25] 25 = 20.00 dB/sec
 [26] 26 = 25.00 dB/sec
 [27] 27 = 30.00 dB/sec
 [28] 28 = 35.00 dB/sec
 [29] 29 = 40.00 dB/sec
 [30] 30 = 50.00 dB/sec
 [31] 31 = 70.00 dB/sec
AGC Redirection
configure voip > media ipmedia >
agc-redirection
[AGCRedirection]
Determines the AGC direction.
 [0] 0 = (Default) AGC works on signals from the TDM side.
 [1] 1 = AGC works on signals from the IP side.
AGC Target Energy
configure voip > media ipmedia >
agc-target-energy
[AGCTargetEnergy]
Defines the signal energy value (dBm) that the AGC attempts
to attain.
The valid range is 0 to -63 dBm. The default is -19 dBm.
AGC Minimum Gain
configure voip > media ipmedia >
agc-min-gain
[AGCMinGain]
Defines the minimum gain (in dB) by the AGC when activated.
The range is 0 to -31. The default is -20.
Note: For the parameter to take effect, a device reset is
required.
AGC Maximum Gain
configure voip > media ipmedia >
agc-max-gain
[AGCMaxGain]
Defines the maximum gain (in dB) by the AGC when activated.
The range is 0 to 18. The default is 15.
Note: For the parameter to take effect, a device reset is
required.
Disable Fast Adaptation
configure voip > media ipmedia >
agc-disable-fast-adaptation
[AGCDisableFastAdaptation]
Enables the AGC Fast Adaptation mode.
 [0] = Disable (default)
 [1] = Enable
Note: For the parameter to take effect, a device reset is
required.
Answering Machine Detector (AMD) Parameters
For more information on AMD, see ''Answering Machine Detection (AMD)'' on page 200.
Answer Machine Detector
Sensitivity Parameter Suite
configure voip > media ipmedia >
amd-sensitivity-parameter-suit
[AMDSensitivityParameterSuit]
Global parameter that defines the AMD Parameter Suite to use.
You can also configure this functionality per specific calls, using
IP Profiles (IpProfile_AMDSensitivityParameterSuit). For a
detailed description of the parameter and for configuring this
functionality in the IP Profiles table, see ''Configuring IP
Profiles'' on page
393.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls
associated with the IP Profile.
Answer Machine Detector
Sensitivity Level
configure voip > media ipmedia >
amd-sensitivity-level
[AMDSensitivityLevel]
Global parameter that defines the AMD detection sensitivity
level of the selected AMD Parameter Suite. You can also
configure this functionality per specific calls, using IP Profiles
(IpProfile_AMDSensitivityLevel). For a detailed description of
the parameter and for configuring this functionality in the IP
Profiles table, see ''Configuring IP Profiles'' on page 393.
Note: If this functionality is configured for a specific IP Profile,
the settings of this global parameter is ignored for calls

AudioCodes MSBG Series Specifications

General

Brand	AudioCodes
Model	MSBG Series
Category	Gateway
Language	English