User's Manual 212 Document #: LTRT-27045
Mediant 1000B Gateway & E-SBC
DHCP Option Code DHCP Option Name
Option 2 Time Offset
Option 66 TFTP Server Name
Option 67 Boot file Name
Option 120 SIP Server
Once you have configured the DHCP server, you can configure the following:
DHCP Vendor Class Identifier names (DHCP Option 60) - see ''Configuring the
Vendor Class Identifier'' on page
216
Additional DHCP Options - see ''Configuring Additional DHCP Options'' on page 217
Static IP addresses for DHCP clients - see ''Configuring Static IP Addresses for DHCP
Clients'' on page
219
Note: If you configure additional DHCP Options in the DHCP Option table, they
override the default ones, wh
ich are configured in the DHCP Servers table. For
example, if you configure Option 67 in the DHCP Option table, the device uses the
value configured in the DHCP Option table instead of the value configured in the
DHCP Servers table.
To view and delete currently serviced DHCP clients, see ''Viewing and Deleting DHCP
Clients'' on page 220.
The following procedure describes how to configure the DHCP server through the Web
interface. You can also configure it through ini file (DhcpServer) or CLI (configure network
> dhcp-server server <index>).
To configure the device's DHCP server:
1. Open the DHCP Servers page (Setup menu > IP Network tab > Advanced folder >
DHCP Severs).
To Next Page
Loading...
Need help?
General
