AUMA AM 02.1 User Manual

5310.4. Intermediate positions: set
5410.4.1. Running direction CLOSE (black section): set
5410.4.2. Running direction OPEN (white section): set
5410.5. Mechanical position indicator: set
5611. Commissioning – controls settings.....................................................................................
5611.1. Actuator controls: open
5611.2. Type of seating: set
5711.3. Push-to-run operation or self-retaining: set
5811.4. Running indication (blinker transmitter): activate/deactivate
5811.5. Torque fault in collective fault signal: activate/deactivate
5811.6. LEDs for torque fault, phase failure, motor protection
5911.7. Positioner
5911.7.1. Input ranges (signal type) for setpoint and actual value
6011.7.2. Behaviour on loss of signal (actuator reaction)
6111.7.3. Adjustment in end positions
6311.7.4. Sensitivity setting
6411.8. EMERGENCY command (EMERGENCY - OPEN/EMERGENCY - CLOSE)
6411.9. Actuator controls: close
6511.10. PTC tripping device (option): test
6612. Corrective action....................................................................................................................
6612.1. Faults during commissioning
6612.2. Fuses
6612.2.1. Fuses within the actuator controls
6812.2.2. Fuses within the control box
6912.2.3. Motor protection (thermal monitoring)
7013. Servicing and maintenance...................................................................................................
7013.1. Preventive measures for servicing and safe operation
7113.2. Maintenance
7113.3. Disposal and recycling
7214. Technical data.........................................................................................................................
7214.1. Technical data Multi-turn actuators
7414.2. Technical data Actuator controls
7714.3. Technical data Control box
7915. Spare parts.............................................................................................................................
7915.1. Multi-turn actuators SA 25.1 – SA 48.1/SAR 25.1 – SAR 30.1
8115.2. Actuator controls AM 01.1/AM 02.1
8315.3. Wall bracket
8515.4. Control cabinet for switchgear
8716. Certificates..............................................................................................................................
8716.1. EU Declaration of Incorporation / Declaration of Conformity
88Index........................................................................................................................................
90Addresses...............................................................................................................................
4
SA 25.1 – SA 48.1 / SAR 25.1 – SAR 30.1
Table of contents AM 02.1

AUMA AM 02.1 Specifications

General

Brand	AUMA
Model	AM 02.1
Category	Controller
Language	English