300-002547-00 rev7 37
7. To delete a target:
a. Select the target to be deleted.
b. Click or tap – next to Targets to delete the target.
8. To delete a path:
a. Select the path to be deleted.
b. Click or tap – next to Paths to delete the path.
9. If you are satisfied with the plan, click or tap Approve Case. A confirmation
message appears, which requires you to accept clinical responsibility for the
created plans.
Selecting approve will make the Add, Delete, and Manual Path icons
unavailable.
If you need to make modifications to a plan, you can click or tap
Unapprove a plan to make changes.
Export a Patient Case
1. Visually review the plan and ensure all targets are planned accurately.
2. Select Approve Case.
NOTE: Only approve a case when all targets and target paths have been
planned.
3. A prompt appears to confirm that you acknowledge the clinical risks of
moving forward with the plan.
4. Do one of the following:
Select Yes to confirm. The target and path icons disappear from the
menu.
Select No if you do not agree with the plan.
5. Select Unapprove Case to continue to edit the plan.
If Unapprove Case is selected, you are prompted to acknowledge clinical
risks each time the case is approved.
6. Click Export to save to a Monarch USB drive.
Note that Export is unavailable unless a Monarch USB drive is inserted
into the laptop. Once a Monarch USB drive is inserted, Export is
available. A progress wheel appears once you select Export.
To Next Page
Loading...