Autonics TM4 Series - Product Introduction; Features

To Next Page

To Previous Page

1 Product Introduction

1.1 Features

TM series module type temperature controller realizes high-speed controlling with superior

sampling cycle (TM4 – 100 ms, TM2 – 50 ms). Side connector connection makes less

wiring work and close mounting possible for up to 31 units without additional power and

communication wires for expansion modules. PC parameter setting and monitoring is

possible via RS485 communication or dedicated USB cable. In addition, more reliable

temperature controlling can be realized via various convenient functions.

 Max. 124 channel simultaneous controlling possible

 Each channel insulated – Dielectric strength 1,000VAC

 No communication and power supply for expansion modules required using module

connectors : Up to 31 module (124 channels/62 channels) expansion possible

 High-speed sampling cycle (TM4:100 ms/TM2:50 ms)

 Heating/Cooling simultaneous controlling

 Heater Burn-Out detection via a current transformer (CT).

 PC parameter setting via USB cable and RS485 communication (Modbus RTU)

: DAQ-MASTER / ParaSet - PC loader program supported

: Dedicated USB cable - no separate power supply or connections required

 Easy maintenance via connector type connection

: Sensor input connector, control output connector, power/communication connector

 Multi-input/multi-range

 Applications: hot runners, electronic furnace, reflow, catapult and extruders

Other manuals for Autonics TM4 Series