Autonics TM4 Series - Enable;Disable Communications Writing; USB-to-Serial Connection

6 Parameter Settings and Functions
© Copyright Reserved Autonics Co., Ltd. 83
6.5.6 Enable/Disable Communications Writing
This feature can change parameter settings stored in memory through communication
with PC, GP, PLC, etc., in order to permit or prohibit writing.
Setting Value Description
ENABLE Parameter set/change enable via communication.
DISABLE Prohibit parameter setting or modification via communication.
Group Parameter Range
Factory
Default
Unit
Option Setting Group
(Communication Setting)
Communication
Write
ENABLE, DISABLE ENABLE -
Reading parameter settings is always permitted.
6.5.7 USB-to-Serial Connection
Data can be transmitted via a USB-to-serial connection. However, RS485 communication
through a USB-to-serial connection is blocked by hardware.