Autonics TM4 Series User Manual

Safety Precautions
vi © Copyright Reserved Autonics Co., Ltd.
Safety Precautions
 Please follow safety precautions to ensure the safe and proper use of the product and
prevent accidents, as well as minimizing possible hazards.
 Safety precautions are categorized as Warnings and Cautions, as defined below:
Warning
Cases that may cause serious injury or fatal accident if
instructions are not followed.
Caution
Cases that may cause minor injury or product damage if
instructions are not followed.
 In case of using this unit with machinery (Ex: nuclear power control, medical
equipment, ship, vehicle, train, airplane, combustion apparatus, safety device,
crime/disaster prevention equipment, etc) which may cause damages to human life or
property, it is required to install fail-safe device.
It may cause a fire, human injury or damage to property.
 Always install the unit on a panel.
It may cause an electric shock if not followed.
 Never wire, repair, or inspect the unit while electricity is flowing through it.
It may cause an electric shock if not followed.
 Check the input power specifications and terminal polarity before connecting the
wires.
It may cause a fire if not followed.
 Only Autonics technicians are authorized to service or modify the product.
It may cause an electric shock or fire if not followed.
 Do not use outdoors.
It may shorten the life of the product and/or cause an electric shock if not followed.
 Always use AWG 20 (0.5 mm
2
) or higher when wiring to the relay's output terminals.
It may pose a fire risk if not followed.
 Always use within the range of rated specifications and performance.

Autonics TM4 Series Specifications

General

Brand	Autonics
Model	TM4 Series
Category	Temperature Controller
Language	English