Autonics TM4 Series User Manual

Safety Precautions
© Copyright Reserved Autonics Co., Ltd. vii
It may shorten the lifespan of the product and/or pose a fire risk if not followed.
 Do not allow loads in excess of the rated switching capacity on relays.
It may damage the insulation, relays and/or cause a fire or faulty connection if not
followed.
 Do not use water or an oil-based solvent to clean the product. Use a dry towel instead.
It may pose an electric shock or fire risk if not followed.
 Do not use the product in a place where it is exposed to flammable or explosive
gases, humidity, direct light, radiant heat, vibration, or impact.
It may pose a fire or an explosion risk if not followed.
 Do not allow dust or wiring fragments to get inside the product.
It may pose a fire or a malfunction risk if not followed.
 Check the terminal's polarity first to properly wire the temperature sensor.
It may pose a fire or an explosion risk if not followed.

Autonics TM4 Series Specifications

General

Brand	Autonics
Model	TM4 Series
Category	Temperature Controller
Language	English