Autonics TM4 Series - Current Output Range Settings

6 Parameter Settings and Functions
60 © Copyright Reserved Autonics Co., Ltd.
6.2.5.2 Current Output Range Settings
If the control output is set to current output, you can select high and low-limit range for the
current output as either 4-20mA or 0-20mA.
Group Parameter Range
Factory
Default
Unit
Initial Setting Group Current Output Range 0-20, 4-20 4-20 -
If the model is TM2-□□C□ (current or SSR output type), the relevant
parameter will be activated only if the control output is set to current.