Avaya 9608 - Switching and Transferring Calls

To Next Page

To Previous Page

• Enter a digit that makes the value of the last three fields of an IPv4 address exceed 255.

• Enter a digit that makes the value of any field of a subnet mask exceed 255.

Enter an IPv6 address using only numbers on the dial pad. Use single tap for touch screen

telephones, except for 2 and 3 which are alphanumeric multitap fields. When you press 2 the

deskphone initially enters a 2, followed by A, B, C, and back to 2. When you press 3 the

deskphone initially enters a 3, followed by D, E, and back to 3. While the cursor is in any of the

leftmost seven fields, when you press the star (*) button makes the value for the field being

entered to be terminated (a zero is displayed if nothing else is), a colon to be displayed in the

space after the field, and the cursor to move to the next space. Pressing “*” while the cursor is in

the last (right most) field results in an error beep and the cursor being left where it is. An IPv6

address is considered to be complete only if all the following conditions are met:

• All seven colons that separate the fields are entered OR the text input field contains at most

one pair of consecutive colons

• If one pair of consecutive colons is present, the final field is not “1” or “01”.

• If one pair of consecutive colons is present, the address format is not “::FFFF:hhhh;hhhh”.

• The value of each field is valid. The following actions cause the value of a given field to be

considered invalid:

- Entering a digit that would cause the value of the first field of an IPv6 address to exceed

FD.

- Entering a third consecutive colon.

- Entering a second pair of consecutive colons.

In a given text entry field, if the either an IPv4 or an IPv6 address can be specified, the initial field

can be ambiguous with respect to whether the entry is an IPv4 or IPV6 address, for example, 123

might be an IPv4 123 decimal or an IPv6 0123 hex. In such cases, text entry follows the IPv6 rules

that hexadecimal characters are allowed and the “*” key inserts a colon character. If the entry is a

hex character (A-F) or a fourth character is entered in the field, the telephone accepts the input is

IPv6 format. Otherwise, the telephone makes the initial validity check when you enter a field

boundary, a colon or decimal point. This initial typographic character determines whether the

overall address must be in IPv4 format with a decimal point or in IPv6 format with a colon. Once

this character is entered, the telephone examines the contents of the first field to ensure

consistency with the field boundary. That is the absence of hex characters, and at most three

characters of value 255 or less, in the first field if the field boundary is a decimal point. If the first

field contains any content inappropriate for the entered field boundary, an error beep is generated.

You cannot enter more content until the contradiction in the text string is deleted, meaning either

the field boundary is deleted or the cursor is moved back and the field contents edited). After you

enter content that identifies the format of the IP address appropriate to IPv4 or IPv6, the rest of the

address entry conforms to that format.

Other manuals for Avaya 9608