Avaya 9608 - Enhanced Call Forwarding Rules

Procedure
1. Select RESET VALUES from the Admin Procedures screen. The phone displays the
following text:
Are you sure you want to reset the phone's initialization values?
2. Press No to return to the Admin Procedures screen without resetting the phone.
Press Yes to start the phone reset.
The phone resets from the beginning of registration, which might take a few minutes. The
phone resets:
• All system values and system initialization values except AUTH and AUTH_ONLY to
default values.
• The 802.1X ID and Password to their default values.
• Call server values to their defaults.
• Any entries in the Redial buffer.
• Does not affect user-specified data and settings like Contacts data or the phone login
and password.
Related links
Using local Administrative Menu procedures on page 36
Restarting the phone
About this task
Note:
When updating local Craft Administration Menu procedures from a touch screen phone,
touching the line you want to change or the applicable softkey produces the same result as
selecting a line and pressing the applicable softkey on a non-touch screen IP phone.
Use the following procedure to restart the phone.
Procedure
1. Select RESTART PHONE from the Craft Procedures screen. The phone displays the
following text:
Press Restart to confirm.
2. Press Cancel to return to the Craft Procedures screen without restarting the phone.
Press Restart to proceed with the registration steps.
A restart does not affect user-specified data and settings like Contacts data or the phone
login and password.
Using local Administrative Menu procedures
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 53
Comments on this document? infodev@avaya.com