EasyManua.ls Logo

Avaya 9608 - Chapter 3: Answering a call; Answering Incoming Calls; Ignoring an incoming call

Avaya 9608
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Do one of the following:
For touchscreen phones, scroll down and tap Administration.
For button phones, press Select.
3. Enter the administrator password on the Enter access code screen.
4. Select Enter.
Related links
Using local Administrative Menu procedures on page 36
Entering data for administrative options
About this task
This section applies to all 9600 Series IP deskphones and describes how to enter data for
administrative options.
Procedure
1. With the exception of a touch screen deskphone, the first application line on any screen is
automatically highlighted selected when the phone displays the screen.
To select an item, press the appropriate softkey at the bottom of the screen, for example,
Change or Save, or OK . To select a different line, use the down or up navigation arrows to
change the line focus. When the desired line is highlighted, then press a softkey or OK to
select that line. For a touch screen deskphone, touching the desired line produces the
same result.
Note:
The deskphone emits an error beep if you attempt to enter invalid data.
2. If you enter a numeric digit that exceeds the maximum field value of the IP Address or
subnet mask value, that is exceeds 255, the phone emits an error beep tone. The system
ignores the digit, and the cursor does not move forward.
3. If you enter a zero followed by a numeric digit for a value, an IP Address, or a subnet mask
field, the new digit replaces the zero.
If you press star (*) and enter an IPv4 address, the system inserts a decimal point into the
input buffer and moves the cursor to the next character location. If the star (*) button is
pressed and the user is entering an IPv6 address, the system inserts a colon into the input
buffer and the cursor is moved to the next character location.
For more information on IPv4 and IPv6 format, see
Entering and validating IPv4 and IPv6
addresses on page 40
4. To go back one space on non-touch screen phones, press the leftmost softkey. In case of a
touch screen deskphone, use the Bksp softkey instead.
Using local Administrative Menu procedures
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 39
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya 9608

Related product manuals