Chapter 4: Using Local Administrative
Menu procedures
Using local Administrative Menu procedures
Related links
About local Craft procedures on page 36
Accessing local Craft procedures on page 37
Running Craft procedures on page 38
Accessing the Administration menu after phone startup on page 38
Entering data for administrative options on page 39
Entering and validating IPv4 and IPv6 addresses on page 40
Local administrative Craft procedures menu on page 42
Setting the operational mode to 802.1X on page 43
Changing IP address information on page 44
Clearing the phone settings on page 46
Debug mode on page 48
Changing Ethernet interface control on page 49
Disabling and enabling event logging on page 50
Logging off from the phone on page 51
Viewing multilanguage strings on page 52
Resetting system values on page 52
Restarting the phone on page 53
Setting or changing the signaling protocol on page 54
Changing SSON settings on page 55
Performing a self-test on page 55
About local Craft procedures
During or after you successfully install an IP phone, a system message might instruct you to
administer one of the manual procedures described in this chapter. These local administrative
procedures are also referred to as Craft procedures.
Local Administrative Options has two forms: One provides access to all the capabilities and
functions described in this chapter.
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 36
Comments on this document? infodev@avaya.com
To Next Page
Loading...
