Changing the group identifier
About this task
When updating local Craft procedures or Admin menu procedures from a touch screen
deskphone, touching the line you want to change or the applicable softkey produces the same
result as selecting a line and pressing the applicable softkey on a non-touch screen IP deskphone.
Note:
Perform this procedure only if the LAN Administrator instructs you to do so.
Procedure
1. Select GROUP from the Craft Procedures screen.
The following text is displayed:
• Current Setting
• New Setting
where Current Setting is the current system value of NVGROUP.
2. In the Group text box, enter a valid Group value from 0 to 999.
3. Press Save to store the new setting. The deskphone displays the Craft Procedures screen.
The deskphone displays the Craft Procedures screen.
Related links
Maintaining 9600 Series IP Deskphones on page 57
Maintaining 9600 Series IP Deskphones
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 68
Comments on this document? infodev@avaya.com
To Next Page
Loading...
