Avaya 9608 - Running Craft Procedures; Accessing the Administration Menu after Phone Startup

To Next Page

To Previous Page

Note:

The factory-set default Craft Access Code (PROCPSWD) is 27238.

Related links

Using local Administrative Menu procedures on page 36

Running Craft procedures

Procedure

1. Press * to display the Craft Access Code Entry screen during deskphone startup and start

local procedures:

Enter code:__

# = OK

2. Enter the local dialpad procedure password that can be composed of any numeric digits fro

zero to seven, as specified by the system administrator in the system value PROCPSWD.

For security purposes, the deskphone displays a star (*) for each numeric dialpad press. If

you are using a touch screen deskphone, and need to go back one space during password

entry, use the Contacts button. You can use the left arrow button or the designated softkey

for non-touch screen phones.

3. Press # when the password entry is complete.

The entry is compared to the PROCPSWD value. If they match, the deskphone displays

the Craft Local Procedure screen, and the message Select procedure and press Start.

4. For all non-touch screen phones, use the navigation arrows to scroll to and highlight the

local procedure you want, then press Start or OK.

You can also scroll to the procedure you want and press the corresponding line button. For

touch screen phones, scroll to the local procedure you want if it not already displayed then

touch the line on which the local procedure you want appears.

Other manuals for Avaya 9608