Avaya 9608 - Local Administrative Craft Procedures Menu

Local administrative Craft procedures menu
Using the administrative procedures, you can customize the IP deskphone installation for your
specific operating environment. This section provides a description of each local administrative
option covered in this guide, with references to the pages on which the option appears.
Note:
For touch screen-based deskphones, simply touching a line or a softkey produces the same
result as selecting a line or a softkey on non-touchscreen or button-based IP deskphones.
Depending upon the privileges assigned to the user by administrator, an end user can view
but cannot change most of the parameters associated with Craft procedures. For more
information, see the applicable user guides.
Administrative
Procedure value
(in English)
Purpose See
8021X Set 802.1X operational mode Setting the Operational Mode to 802.1X on
page 43.
ADDR Address information programming Use the pre-installation checklist.
AGC Enable/disable Automatic Gain
Control
Disabling/enabling automatic gain control on
page 66.
CALIBRATE
SCREEN
Calibrate the touch screen Calibrating the Touch Screen on page 65.
CLEAR Clear all values to factory defaults Clearing the deskphone settings on page 46.
CONT Adjust the contrast of any Button
Modules and any non-color
deskphones
Adjusting contrast on button modules and non-
color deskphones on page 65.
DEBUG Enable/disable Debug Mode Enabling and disabling the debug mode.
GROUP Set the Group Identifier Changing the group identifier on page 68.
HSEQUAL Handset audio equalization Setting handset audio equalization on
page 67
INT Interface Control Changing Ethernet interface control on
page 49.
LOG Enable/disable Event Logging Disabling/enabling event logging on page 50.
LOGOUT Log off the deskphone Loging off The deskphone on page 51.
MLS View Multi-Language text Strings Viewing multi-language strings on page 52.
RESET VALUES Reset system initialization values to
defaults
Resetting system values on page 52.
RESTART
PHONE
Restart the deskphone Restarting The deskphone on page 53.
SIG Set the signaling protocol download
flag
Changing the signaling protocol.
Table continues…
Using Local Administrative Menu procedures
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 42
Comments on this document? infodev@avaya.com