Administrative
Procedure value
(in English)
Purpose See
SSON Set the Site-Specific Option Number Changing SSON settings on page 55.
TEST Initiate a self-test Performing a self-test on page 55.
VIEW View current parameter values and
file names
Using The VIEW craft procedure for
troubleshooting on page 70.
VPN Administer and view Virtual Private
Network (VPN) settings
VPN Setup Guide for 9600 Series IP
Telephones, 16-602968.
Note:
1. A 9608 and 9608G deskphone always lists the CONT procedure. Other color
deskphones list the CONT only if the deskphone has at least one button module
attached.
2. If the deskphone software has VPN and media encryption disabled, VPN will not
appear on the Craft procedures menu list. To determine if this applies to the
deskphone, go to the About Avaya IP Deskphone screen through the Avaya (A) Menu
or Home screen as applicable to the phone, and select the Settings list.
Related links
Using local Administrative Menu procedures on page 36
Setting the operational mode to 802.1X
About this task
Use the following procedure to set or change the operational mode.
Note:
When updating local Craft procedures from a touch screen deskphone, touching the line you
want to change or the applicable softkey produces the same result as selecting a line and
pressing the applicable softkey on a non-touch screen IP deskphone.
Procedure
1. When you select 802.1X from the Craft Procedures screen, the deskphone displays the
following:
Supplicant:
Pass-thru:
where the Supplicant line is the text string associated with the current system value of
DOT1XSTAT. The DOT1XSTAT parameter configures the 802.1X Supplicant Mode
operation control, defined as:
Using local Administrative Menu procedures
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 43
Comments on this document? infodev@avaya.com
To Next Page
Loading...
