Note:
When updating Local Craft procedures from a touch screen phone, touching the line you want
to change or the applicable softkey produces the same result as selecting a line and pressing
the applicable softkey on a non-touch screen IP phone.
Use the following procedure to invoke manual address information programming.
Procedure
1. Select ADDR from the Craft Procedures screen. The next screen displays the following
fields with the prompt Select address to change.
Static addressing field Field value Description
Phone (IPv4) nnn.nnn.nnn.nnn phone IP address (IPADD)
Phone (IPv6) hhhh:hhhh::hhhh:hhhh:hhhh phone IP address (NVIPADDV6)
Call Server nnn.nnn.nnn.nnn
hhhh:hhhh::hhhh:hhhh:hhhh
Call Server in use; media server
IP address
Router (IPv4) nnn.nnn.nnn.nnn Router in use; gateway/router IP
address
Mask (IPv4) nnn.nnn.nnn.nnn IP network mask (NETMASK)
HTTP Server nnn.nnn.nnn.nnn
hhhh:hhhh::hhhh:hhhh:hhhh
IP address of HTTP File Server
in use
HTTPS Server nnn.nnn.nnn.nnn
hhhh:hhhh::hhhh:hhhh:hhhh
IP address of HTTPS (TLS) File
Server in use
802.1Q L2Q text string L2Q setting text description
VLAN ID dddd NVL2QVLAN
VLAN Test ddd VLANTEST
where:
• nnn.nnn.nnn.nnn is the current IP address in IPv4 format associated with the specific
address information on the left side, which could be either a value previously set by a
technician, or the original value of NVIPADD if no previous change was made.
• hhhh:hhhh:hhhh:hhhh:hhhh is the current IP address in IPv6 format associated with the
specific address information on the left side, which could be either a value previously set
by a technician, or the original value of NVIPADD if no previous change was made.
• L2Q text string is the text string associated with the current system value of L2Q where
Auto = an L2Q value of 0, On = an L2Q value of 1, and Off = an L2Q value of 2.
• dddd is the current value of NVL2QVLAN and ddd is the current value of VLANTEST,
respectively.
2. Use the navigation arrows to scroll to and highlight the address you want to change, then
press Change to display the change screen for that specific address value.
3. Select one of the following as appropriate to the item you selected:
Using local Administrative Menu procedures
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 45
Comments on this document? infodev@avaya.com
To Next Page
Loading...
