Procedure
1. Tap or select TEST from the Craft Procedures screen. The phone displays the following
text:
Press Test to confirm.
2. Tap or press Test to start phone testing.
Tap or press Cancel to return to the Craft Procedures screen without testing the phone.
The test performs the following actions:
• Removes labels on all softkeys .
• Illuminates groups of LEDs at a time on the phone and any attached button modules
sequentially for about a half second. Illumination starts with the upper half of the phone
and continues through the lower half of any attached button module in a repeating cycle.
• Shows pixels on the display with highest intensity.
After approximately 5 seconds, the top phone screen displays either Self-test passed or
Self-test failed.
3. Press or tap Back to return to the Craft Procedures screen.
Related links
Using local Administrative Menu procedures on page 36
Using Local Administrative Menu procedures
March 2018 Installing and Maintaining Avaya 9608/9608G/9611G/9621G/9641G/9641GS IP
Deskphones H.323 56
Comments on this document? infodev@avaya.com
To Next Page
Loading...
