Issue 2 July 2005 113
Chapter 8: Avaya C360 Layer 2 Features
This section describes the C360 Layer 2 features. It provides the basic procedures for
configuring the C360 for Layer 2 operation.
The C360 supports a range of Layer 2 features. Each feature has CLI commands associated
with it. These commands are used to configure, operate, or monitor switch activity for each of
the Layer 2 features.
This section of the C360 Installation and Maintenance Guide explains each of the features.
Specifically, the topics discussed here include:
● Ethernet
● VLANs
● IEEE 802.1x (Port Based Network Access Control)
● Spanning Tree Protocol
● MAC Security
● LAG (Link Aggregate Group)
● Port Redundancy
● IP Multicast Filtering
● RMON
● SMON
● Port Mirroring
● Weighted Queuing
● LLDP Server
To Next Page
