Avaya C360 - MAC Security CLI Commands

MAC Security
Issue 2 July 2005 137
MAC Security CLI Commands
The following table contains a list of CLI commands for the MAC Security feature. The rules of
syntax and output examples are all set out in detail in the Reference Guide for the Avaya C360
Converged Stackable Switch, 10-300506.
In order to... Use the following
command...
Enable/Disable MAC security for
the switch
set security mode
Display the MAC security mode
for the switch
show security mode
Enable/Disable MAC security for
a specific port
set port security
Display the MAC security mode
for a port
show port security
Specify the action taken when
there is a security violation
set security violation action
Add a MAC address to a port's
list of allowed MAC addresses
set secure mac
Remove a MAC address from a
port's list of allowed MAC
addresses
clear secure mac
Display a port's list of allowed
MAC addresses
show secure mac