Avaya C360 User Manual

Recovery Password
Issue 2 July 2005 85
Recovery Password
Introduction to Recovery Password
The C360 provides a recovery password in the event that you have forgotten the login
password for the switch. The recovery password feature enables you to login to the device in a
super user mode and change the regular login password.
The recovery password feature can be disabled preventing unauthorized user to login to the
device using the recovery password. However, if the recovery password feature is disables and
you forget the login password, it will not be possible to log in to the switch. By default the
recovery password feature is enabled.
To use the recovery password feature, you must connect to the switch's console port. Log in
using the user name "root" and password "ggdaseuaimhrke". Use the set username command
to change the password for the user "root".
Tip:
Tip: Enabling and disabling the Recovery Password protocol can only be done using
a direct console connection via the Console port.
Recovery Password CLI Commands
The following recovery password commands are available.
For a complete description of the recovery password commands, including syntax, refer to
Reference Guide for the Avaya C360 Converged Stackable Switch, 10-300506.
Table 18: Recovery Password CLI Commands
In order to... Use the following command...
Enable the recovery password
feature on the switch
terminal recovery password
enable
Disable the recovery password
feature on the switch
no terminal recovery password

Avaya C360 Specifications

General

Brand	Avaya
Model	C360
Category	Switch
Language	English