Port Redundancy
Issue 2 July 2005 143
Port Classification
Overview
With the C360, you can classify any port as regular or valuable. Setting a port to valuable
means that, in case of Ethernet link failure of that port, a link fault trap can be sent even when
the port is disabled. This feature is particularly useful for the link/intermodule redundancy
application, where you need to be informed about a link failure on the dormant port and resume
traffic quickly.
Port Classification CLI Commands
In order to... Use the following command...
Set the port classification to
either regular or valuable
set port classification
Display a port's classification show port classification
To Next Page
Loading...
Need help?
General