Avaya C360 - IP Multicast CLI Commands

Avaya C360 Layer 2 Features
146 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
IP Multicast CLI Commands
The following table contains a list of the CLI commands for the IP Multicast feature. The rules of
syntax and output examples are all set out in detail in the Reference Guide for the Avaya C360
Converged Stackable Switch, 10-300506.
In order to... Use the following command...
Enable or disable the IP
multicast filtering application
set intelligent-multicast
Define aging time for client ports set intelligent-multicast client
port pruning time
Define aging time for router
ports
set intelligent-multicast router
port pruning time
Define group filtering time
delays
set intelligent-multicast
group-filtering delay time
Display the status IP multicast
filtering application
show intelligent-multicast
Shows whether the connected
unit's hardware supports IP
multicast filtering
show intelligent-multicast
hardware-support