Avaya C360 - Activating a Routing License Key; License Key CLI Commands

Obtaining and Activating a License Key
Issue 2 July 2005 165
Activating a Routing License Key
To activate a Routing License Key:
1. Enter the acquired Routing License Key into the C360 switch using the set license CLI
CLI command.
set license [module] [license] [featureName]
where:
module - C360 switch number (the location of the device in the stack)
license - license code
featureName - routing
and press Enter.
2. Reset the module.
3. Check that the license is activated using the show license CLI command.
License Key CLI Commands
In order to... Use the following command...
Configure the feature license set license
Display the feature license show license
Display the switch identity
required for acquiring a license
show module-identity