Avaya C360 - Powering Up the Avaya C360

Issue 2 July 2005 53
Chapter 4: Powering Up the Avaya C360
This chapter describes the procedures for powering up C360 switches.
Connecting the C360 to the main electrical supply provides power to the switch and for Power
over Ethernet (PoE).
!
WARNING:
WARNING: To isolate the switch completely, you must disconnect all the power connections
(AC plug and BUPS DC power).
!
ADVERTENCIA:
ADVERTENCIA: Para aislar el equipo totalmente desconecte todas las conexiones de energía
(Enchufe de CA y fuente de CC del BUPS)
Figure 14: C360 Back Panel
Figure notes:
1. AC Input
2. BUPS DC Input
1
2